If you are reading this article, you probably are wondering how to remove the flow restrictor from the shower head. Well, there is really only one answer to this question. You need to know the exact make and model of your shower head in order to be able to remove it. There is also a setting in your shower head which controls the flow of water through the shower. The flow restrictor causes the maximum amount of water through your shower.
In the United States, shower heads are usually required to have a flow restrictor, but if you like, you can also remove it and increase the flow of your shower head. First, you will need to remove the two screws from the clockwise ring on the hose. Then, you will need to unscrew the two nuts on the outer end of the hose. Once you have removed the nuts and ring from the shower head, you can pull the hose away from the body.
If you’re wondering how to remove the flow restrictor from shower head by yourself, then I will show you in the following steps. Firstly, if you do not remove it by yourself, it is best that you hire someone who knows how to remove it. When it comes to removing this type of device, it can be quite tricky. However, if you know someone who has tried it before and was successful, you can try asking him for help.
So, if you’re thinking that removing this type of device is simple, then you are wrong. When removing the flow restrictor, it is very important that you should take it slow. It is better if you should lubricate it first. Lubrication is one of the main things that can help you in removing it successfully. The next thing that you should do is to take a cloth and spray the entire shower area. spraying it will prevent the water to flow through the restrictor, thus preventing it from causing damages to your shower head.
Also Read: How to Decorate a Bedroom With Neutral Colors
Next, you should turn the shower on and then you need to turn the nut counterclockwise. You should apply moderate pressure in this process. However, I would like to tell you one thing that you should be careful in doing this step. It is important for you to turn the restrictor with full force. Otherwise, it may cause damages to your showerhead.
Furthermore, if you do not know what to do when it comes to putting the new one in place, then I will recommend you to take the help of a flow restrictor replacement kit. There are numerous products that are designed for the replacement of these parts. Therefore, you do not have to worry about finding the best product for the replacement. However, you must make sure that the shower head fitting kit that you choose must meet the strict requirements of the shower. In addition, it is also important for you to consider buying the best quality of showerhead fitting part that you purchase.
The next step that you should follow in removing this part is to disconnect the old o-ring. You can do this by either undoing the bolts or simply pulling it off. Then, you should proceed to remove the restrictor with the help of some tools that you can find on the market. The most common tools that are used to remove this part are pliers, wire cutters, and a wrench.
The last step that you should take in order to replace the o-ring and remove the flow restrictor in the showerhead is to place the replacement piece inside the existing opening. This can be done by using adapters that are made specifically for the removal of showerheads. In addition, you should fill the gap created by the removal of the flow restrictor with some more of the same type of water and then slowly tighten the adapters to seal the new water supply.
image by sensibledigs.com