7 tips for Using Power Saws

Power Saws
image credit: www.grainger.com

A power saw is an absolutely necessary tool for a carpenter on a construction site and woodworking projects as well. It is an effective instrument that helps to build a range of beautiful products, from shelves to amazing pieces of art.

For novices, using a power saw seem more complicated and less comfortable. But don’t worry now; we will help you with the top 7 tips for using power saws to cut confidently and safely.

These pro tips will help you to build everything faster and better.

  1. Don’t set the blade too deep

Setting the blade too deep causes a lot of problems. It is very dangerous than the correctly set blade as the more blade is exposed while cutting. If the blade is too deep, the saw will bind and kick back.

When properly set, the blade makes a more efficient cut and also safe to use. The power saw blades come in various sizes. Get familiarized with the saw you are using for smooth functioning.

  • Wear eye protection and gloves while using Power Saws

Safety comes first. Before you start working with the power saws, take some safety precautions. Equip yourself with the pair of gloves and safety glasses to keep the vulnerable areas to be covered.

Also, wear snug-fitting clothes and tie back your hairs to prevent them from being caught in the moving blade.

  • Allow the cut off to move away freely

Make sure that the end of the board that you are cutting fall away freely. As the cut comes near completion, the falling piece may take a sliver of wood with it. So, be aware as it can hurt the working professional.

To avoid this situation, always support the board continuously you are cutting. But don’t clamp or restrict the cut off piece.

  • For precise cutting push the blade slowly

To make a precise cut, it is very crucial to the push the saw slowly along the surface of the material. Use both the hands to maneuver the saw straight on the cut line. Always make sure that the right-hand side notch of the base plate should be aligned with the cutting line every time.

Do not force or jerk the saw along, instead move it at an easy and natural speed when the blade passes through the material.

  • Secure the board for rip cuts

Usually, a table saw is considered ideal for ripping lumber than a circular saw. But if you don’t have a table saw and don’t need a precise rip cut, then circular saw works fine in this situation.

The handiest trick is to hold the board while you rip it. If the board is very wide, clamp it and make cuts.

  • Start again if the saw wanders from the line

Cutting along a straight line requires skills and practice. Once the blade aligned and cut along the line, then it does not need much effort to keep the blade on track after that.

If you get off to a crooked start, then stop the blade from spinning. Take out the saw from the cut, place it along the line and start all over again.

  • Unplug the saw when not in use

When you are done with the cutting work, lock the blade guard in the down position. Remove the plug from the outlet and put the saw away until you use it next time. Store the saw on a flat surface and keep its blade away from the nearby objects.

Among various other instruments in your workshop, a power saw is the most inexpensive and versatile power tool. Buy power saw online and get your job done safer, faster and smoother with these pro tips.